MAINTENANCE OF NATURAL STONE FLOORS
Caring for a natural stone floor is not as difficult as you may think. Following this simple guidance will help you to keep your floor looking its best for years to come.
Vacuum or sweep the floor regularly to remove any dust and grit. For best practice this should be followed by washing the floor to remove any residual dirt and grease.
We recommend using a specialist natural stone cleaning product which is PH neutral. Proprietary household cleaners should be avoided as they will erode the protective sealant and increase the porosity of the flooring, thereby reducing its ability to repel spillages and stains.
Artorius Faber Stone Wash Aftercare Cleaner is available to purchase direct from us. Further details are available here.
Even with regular cleaning it is natural that dust and grime will build up over the years. We recommend an intensive clean to remove ingrained dirt and grease is carried out every 3-4 years depending on the amount of foot traffic and where the floor is located.
Once installed your floor will be coated with a protective sealant. Depending on the type of stone, some floors will benefit from re-sealing every 2-3 years. You will be able to tell if the floor needs re-sealing after washing it. If the water leaves marks or darkens the stone for a period of time afterwards, this indicates that the stone is absorbing moisture and would therefore benefit from re-sealing.
Please contact us for further advice on maintenance and recommended cleaning products.